Ultimate Home Workshop

I'm Now So Organized...I Can't Find Anything...


Sorry about the light blogging recently, but I have a good excuse...I'm happy to report that the last dust settled in my Basement yesterday afternoon.

OK...maybe the next to last dust.

That would be because like most men's home workshops...they're always a work in progress.

That said, I say that I'm finished with mine for now because:

A. I've run out of money

B. I'm tired of building the shop and I believe that it's time to actually get some WORK done in my "workshop."

In the past four weeks I've taken every single tool I own, and almost every single nut and bolt and nail--or at least the boxes containing same--and dusted them off and cleaned things out and sorted like things in with like things to the point that when everything went back on the shelves and bunkers and bins this morning I find myself wandering around in my own basement like an Alzheimer's patient in a Nuclear Plant (or maybe a shopping mall.)

For your enjoyment, here's a photo looking at the entry wall of the 20'x12' shop area. All of the doors in these pictures are recycled Luan doors I pulled out of the main house when I replaced them with painted 6 panel slabs last year.



The bi fold doors cover a computer workstation with keyboard shelf and room for a file cabinet and my technical books. Of course there's also the obligatory TV and radio...if I could get a recliner in the room Pat and Missy the Turbo Pup would never see me again except at dinner I'm afraid.



Here's a look at the old workbench that was in that spot in the basement when we bought the house. It's build out of giant salvage lumber from the original home owner's farm and weighs about 500# I guess. Like that red door there covering my paint cans and WD-40?



Here's the wall opposite the entry, again showing our old closet doors covering a whole wall of storage shelves that came with the house...



Here's the same wall with the doors open showing where all the tools and supplies I've carefully put away and then forgotten which storage tub they reside in...



And finally, here's the new electronics workbench, made out of the old master bathroom door and covered with a sheet of 3/4" plywood. If you look closely you'll notice that the legs fold up and the whole thing is hinged to the wall (the entire wall is made of old doors except about 6" in one corner) so it can fold down out of the way if I ever decide to build a 16' sail boat or an experimental airplane in my old age...



There's still new 50 Amp 220 Volt and 20 Amp 110 Volt electrical circuits to install for future equipment like a small welding machine and larger capacity air compressor, but in the mean time I'm settling for the rewired and extended 1963 electrical circuits augmented with a new #6 grounding wire/rod circuit in an effort to reduce the chances of frying either myself or the sensitive equipment that will take form on the new bench.

Any way...back to my original point, I need to build something...and to that end I've had UPS dropping off multiple boxes almost every day this week, and I did another trip today to the Home Depot electrical isle for things like wire ties and wire labels and other wiring management stuff.

There's still a wire and tool trip to Radio Shack and Granger and possibly Northern Tool, and in the mean time I'm still waiting on the touch screen PLC (Programmable Logic Controller) to arrive from Indianapolis.

Speaking of Indianapolis, coincidentally Pat and Missy the Turbo Pup and I will be up there next week for a three day training class on the PLC company's unique programming software. It's free if you'll pay your own per diem and we couldn't pass up the opportunity.

That, and we hadn't made a road trip in about a month and I didn't want to violate my personal and now company travel policies--one adventure every thirty days of at LEAST eight hours in round trip duration.

I'm so excited about this chance to advance skills I haven't used since back in the early 1980's, and things have come so far technically since then (i.e. SIMPLER TO UNDERSTAND THAN EGYPTIAN HIEROGLYPHICS) that I hope it's true that almost anyone with programming experience can become a PLC expert in short order.

I guess that it's time to do some paper work and a little news surfing...and why don't you join me in praying for the dead and wounded and their families out at Ft. Hood--yet additional victims of another wild eyed believer in that ever peaceful religion of Islam.



(&%$#@!ing towel heads...)